GOLD EAGLE CO. -- 24/11 OZ. GAS LINE A/F  -- 2920-00B070056
<pre>=====================  Product Identification  =====================

Product ID:24/11 OZ. GAS LINE A/F
MSDS Date:06/18/1990
FSC:2920
NIIN:00B070056
=== Responsible Party ===
Company Name:GOLD EAGLE CO.
Address:4400 S. KILDARE BLVD.
City:CHICAGO
State:IL
ZIP:60632-4372
Country:US
Info Phone Num:312-376-4400
Emergency Phone Num:800-535-5053 (INFOTRAC)
CAGE:DO861
=== Contractor Identification ===
Company Name:GOLD EAGLE CO.
Address:4400 S. KILDARE
City:CHICAGO
State:IL
ZIP:60632
Country:US
Phone:1-312-376-4400
CAGE:DO861
Company Name:GOLD EAGLE COMPANY
Address:4400 S KILDARE BLVD.
Box:97267
City:CHICAGO
State:IL
ZIP:60632-4372
Country:US
Phone:773-376-4400
CAGE:2M612

=============  Composition/Information on Ingredients  =============

Ingred Name:METHYL ALCOHOL
CAS:67-56-1
Fraction by Wt: 100%
Other REC Limits:NONE SPECIFIED
OSHA PEL:S,200PPM/250STEL
ACGIH TLV:S,200PPM/250STEL; 93
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Health Hazards Acute and Chronic:HIGH ONCENTRATIONS OF METHANOL
    SWALLOWED OR INHALED CAN PRODUCE HEADACHE, DROSINESS,
    LIGHTHEADNESS, NAUSEA, BLINDNESS AND DEATH.
Effects of Overexposure:POISONOUS! MAY BE FATAL IF INHALED AT HIGH
    VAPOR LEVELS. SKIN AND EYE IRRITATION. POISONOUS IF SWALLOWED.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:INHALATION: MOVE VICTIM TO FRESH AIR/CALL MEDICAL PERSONNEL;
    IF NOT BREATHING, PERFORM ARTIFICIAL RESPIRATION. IF BREATHING IS
    DIFFICULT, GIVE OXYGEN. SKIN: IMMEDIATELY FLUSH W/WATER FOR AT
    LEAST 15 M IN., GET MEDICAL ATTENTION IF NEEDED. EYES: FLUSH
    W/RUNNING WATER FOR AT LEAST 15 MIN., SEEK MEDICAL ATTENTION IF
    NEEDED. INGESTION: GET IMMEDIATE MEDICAL ATTENTION. USE SYRUP OF
    IPECAC TO VOMIT.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:52.0F,11.1C
Lower Limits:6.0
Upper Limits:36.5
Extinguishing Media:DRY CHEMICAL, CO2, WATER SPRAY, FOAM
Fire Fighting Procedures:SELF-CONTAINED BREATHING APPARATUS WITH A FULL
    FACEPIECE OPERATED IN PRESSURE-DEMAND OR OTHER POSITIVE PRESSURE
    MODE.
Unusual Fire/Explosion Hazard:RUNOFF TO SEWER MAY CREATE FIRE OR
    EXPLOSION HAZARD.

==================  Accidental Release Measures  ==================

Spill Release Procedures:CONTAIN SPILL, TRANSFER TO SECURE CONTAINERS.
    IN THE EVENT OF AN UNCONTROLLED MATERIAL RELASE, THE USE SHOULD
    DETERMINE IF RELEASE IS REPORTABLE UNDER APPLICABLE LAWS AND
    REGULATIONS. ABSORB SMALL SPI LLS WITH SUITABLE MATERIAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN COOL, DRY AREA. AVOID HEAT,
    SPARKS AND SOURCE OF IGNITION.
Other Precautions:FLAS POINT IS 54F, VAPORS MAY TRAVEL TO SOURCE OF
    IGNITION AND FLASHBACK, CONTAINER MAY EXPLODE IN HEAT OF FIRE.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH APPROVED RESPIRATOR FOR CONCENTRATION >200
    PPM.
Ventilation:PROVIDE PROPERLY ENGINEERED VENTILATION TO MAINTAIN
    METHANOL VAPORS BELOW NIOSH PEL.
Protective Gloves:SOLVENT RESISTANT GLOVES.
Eye Protection:SPLASH PROOF SAFETY GOGGLES.
Other Protective Equipment:CHEMICAL RESISTANT APRON OR CLOTHING AS
    NEEDED.
Work Hygienic Practices:STANDARD PERSONAL HYGIENE.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

HCC:F5
Boiling Pt:B.P. Text:147F,64C
Vapor Pres:96
Vapor Density:1.1
Spec Gravity:0.795
Evaporation Rate &amp; Reference:3.5
Solubility in Water:SOLUBLE
Appearance and Odor:CLEAR WATER WHITE LIQUID, NO ODOR WAS SPECIFIED BY
    MANUFACTURER.
Percent Volatiles by Volume:100

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS
Stability Condition to Avoid:HEAT, OPEN FLAME, SOURCES OF IGNITION.
Hazardous Decomposition Products:CO, CO2
Conditions to Avoid Polymerization:HEAT, OPEN FLAMES, SOURCES OF
    IGNITION

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF PRODUCT IN ACCORDANCE WITH LOCAL,
    STATE AND FEDERAL REGULATIONS. BEFORE ATTEMPTING CLEAN UP, REFER TO
    OTHER SECTIONS OF MSDS FOR HAZARD CAUTION INFORMATION.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.