THERMACOTE WELCO -- KLEEN GREEN - NOZZLE GEL  -- 6810-00F019541
<pre>=====================  Product Identification  =====================

Product ID:KLEEN GREEN - NOZZLE GEL
MSDS Date:07/10/1990
FSC:6810
NIIN:00F019541
=== Responsible Party ===
Company Name:THERMACOTE WELCO
Address:HWY 161 SOUTH, YORK RD
Box:69
City:KINGS MOUNTAIN
State:NC
ZIP:28086
Info Phone Num:(704) 739-6421
Emergency Phone Num:(704) 739-6421
CAGE:0AES5
=== Contractor Identification ===
Company Name:THERMACOTE WELCO CO
Address:HWY 161 TORK RD
Box:City:KINGS MOUNTAIN
State:NC
ZIP:28086
Country:US
CAGE:0AES5

=============  Composition/Information on Ingredients  =============

Ingred Name:NON-HAZARDOUS FOR INGREDIENTS

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:NO	Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Explanation of Carcinogenicity:NONE

=======================  First Aid Measures  =======================

First Aid:EYES: FLUSH W/WATER FOR 15 MINS. SKIN: WASH W/SOAP & WATER.
    INHALATION: REMOVE TO FRESH AIR. INGESTION: DRINK WATER. OBTAIN
    MEDICAL ATTENTION IN ALL CASES.

=====================  Fire Fighting Measures  =====================

Flash Point Method:COC
Flash Point:>390F
Extinguishing Media:CO2, DRY CHEMICAL, OR FOAM
Fire Fighting Procedures:WATER SPRAY IS AN UNSUITABLE EXTINGUISHING
    AGENT. WEAR SELF-CONTAINED BREATHING APPARATUS IN PRESSURE-DEMAND
    MODE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:SHUT OFF LEAK & DIKE UP LARGE SPILLS. AFTEF
    COOLING & SOLIDIFICATION, SCRAPE & SHOVEL UP MATERIAL. FINALLY,
    CLEAN AREA W/AN OIL ABSORBENT MATERIAL.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE AWAY FROM FLAME, TEMPS >250F.
    KEEP AWAY FROM STRONG OXIDIZING AGENTS.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:AS REQUIRED
Protective Gloves:IMPERVIOUS
Eye Protection:FACE SHIELD IF PRODUCT IS MOLTEN
Other Protective Equipment:COVERALLS WHEN MOLTEN
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

Melt/Freeze Pt:M.P/F.P Text:100.4-140F
Spec Gravity:0.815-0.88
Solubility in Water:INSOLUBLE
Appearance and Odor:OPAQUE, NO ODOR

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:FLAME, TEMPERATURES >250F

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
    FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.