FEDERATED-FRY METALS -- ACID CORED SOLDER WIRES,INCL 40/60ACID CORE -- 6850-00N011887 
=====================  Product Identification  =====================

Product ID:ACID CORED SOLDER WIRES,INCL 40/60ACID CORE
MSDS Date:06/15/1989
FSC:6850
NIIN:00N011887
=== Responsible Party ===
Company Name:FEDERATED-FRY METALS
Address:6TH AVENUE & 41ST STREET
City:ALTOONA
State:PA
ZIP:16602
Country:US
Info Phone Num:814-946-1611 (DON PORTER)
Emergency Phone Num:800-424-9300(CHEMTREC);814-946-1611
CAGE:65172
=== Contractor Identification ===
Company Name:FRY TECHNOLOGY DIV OF COOKSON AMERICA INC
Address:6TH AVE AND 41ST ST
Box:City:ALTOONA
State:PA
ZIP:16602
Country:US
Phone:814-946-1611
CAGE:65172

=============  Composition/Information on Ingredients  =============

Ingred Name:SILVER  (SARA III)
CAS:7440-22-4
RTECS #:VW3500000
Other REC Limits:N/K 
OSHA PEL:0.01 MG/M3
ACGIH TLV:0.1 MG/M3; 9192
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

Ingred Name:LEAD  (SARA III)
CAS:7439-92-1
RTECS #:OF7525000
Other REC Limits:N/K 
OSHA PEL:0.05 MG/M3;1910.1025
ACGIH TLV:0.15 MG/M3;DUST 9192
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

Ingred Name:INDIUM
CAS:7440-74-6
RTECS #:NL1050000
Other REC Limits:N/K 
OSHA PEL:0.1 MG/M3
ACGIH TLV:0.1 MG/M3; 9192

Ingred Name:ANTIMONY  (SARA III)
CAS:7440-36-0
RTECS #:CC4025000
Other REC Limits:N/K 
OSHA PEL:0.5 MG/M3
ACGIH TLV:0.5 MG SB/M3; 9192
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:ZINC CHLORIDE  (SARA III)
CAS:7646-85-7
RTECS #:ZH1400000
Fraction by Wt: 1-4%
Other REC Limits:N/K 
OSHA PEL:1 MG/M3/2 STEL
ACGIH TLV:1 MG/M3/2STEL FUME93
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Ingred Name:TIN
CAS:7440-31-5
RTECS #:XP7320000
Other REC Limits:N/K 
OSHA PEL:2 MG/M3
ACGIH TLV:2 MG/M3; 9192

Ingred Name:BISMUTH
CAS:7440-69-9
RTECS #:EB2600000
Other REC Limits:N/K 
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:WATER
CAS:7732-18-5
RTECS #:ZC0110000
Fraction by Wt: 0-1%
Other REC Limits:N/K 
OSHA PEL:N/K 
ACGIH TLV:N/K 

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:N/K 
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:YES	 OSHA:NO
Health Hazards Acute and Chronic:MOLTEN SOLDER & FLUX BURNS SKIN,FLUX
    MAY CAUSE SKIN ULCERATION.LEAD IS TOXIC BY INGEST;CAUSES INTERNAL
    INJURY & AFFECTS KIDNEYS & LIVER.EXCESS INHAL OF FLUX FUMES MAY
    LEAD TO INTERNAL ULCERATION OR BU RNS.PRLNG LEAD OVEREXP MAY DMG
    CNS & KIDNEYS.LEAD KNOWN TO CAUSE REPRO DISORDERS
    (FEMALE,MALE,DEVEL) (CAL PROP 65,1987).
Explanation of Carcinogenicity:INORGANIC LEAD & LEAD
    COMPOUNDS:INADEQUATE EVID FOR CARCIN IN HUMANS;SUFFICIENT EVID FOR
    CARCIN IN ANIMALS (IARC,1987).
Effects of Overexposure:EYES:FLUX FUMES-SEVERE IRRITANT.SKIN:MOLTEN
    SOLDER & FLUX-BURNS.FLUX-ULCERATION.INORG TIN
    CMPDS-IRRITANTS.ABSORPTION NOT
    KNOWN.INGEST:UNLIKELY.LEAD-TOXIC,CAUSES INTERNAL INJURY,AFFECTS
    KIDNEYS & LIVER .INHAL:FLUX FUMES IRRITATE MUCOSAL SURFACES,LEADS
    TO INTERNAL ULCERATION/BURNS.PRLNG LEAD OVEREXP DMG CNS,(SEE SUPP)
Medical Cond Aggravated by Exposure:N/K 

=======================  First Aid Measures  =======================

First Aid:EYES:REMOVE FROM EXPOSURE,FLUSH EYES WITH WATER FOR AT LEAST
    15 MINUTES.GET MEDICAL ATTENTION.SKIN:FOR BURNS,COOL WITH COLD
    WATER AND GET MEDICAL ATTENTION.INGESTION:GET MEDICAL ATTENTION
    IMMEDIATELY. INHALATION:REMOVE TO FRESH AIR.IF BREATHING IS
    DIFFICULT,ADMINISTER OXYGEN AND GET MEDICAL ATTENTION.

=====================  Fire Fighting Measures  =====================

Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
    EQUIPMENT .
Unusual Fire/Explosion Hazard:WHEN HEATED TO HIGH TEMPERATURES,LEAD
    EMITS TOXIC FUMES.HAZARDOUS DECOMPOSITION PRODUCTS:FUMES EMITTED IN
    SOLDERING OPERATION MAY CONTAIN ZINC CHLORIDE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:IF MOLTEN,ALLOW TO COOL AND SOLIDIFY THEN
    SCRAPE UP.
Neutralizing Agent:N/K 

======================	Handling and Storage  ======================

Handling and Storage Precautions:NO SPECIAL STORAGE REQUIREMENTS.KEEP
    OUT OF REACH OF CHILDREN.FOR INDUSTRIAL USE ONLY.DO NOT TAKE
    INTERNALLY.
Other Precautions:N/K 

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:REQUIRED IF TLV'S ARE NOT BEING MAINTAINED.USE
    FUME MASKS.
Ventilation:REQUIRED TO PREVENT OPERATORS BREATHING FUMES DURING
    SOLDERING.
Protective Gloves:NOT USUALLY NECESSARY.
Eye Protection:FACESHIELD & GOGGLES DURING SOLDERING.
Other Protective Equipment:N/K 
Work Hygienic Practices:NO FOOD,DRINK OR TOBACCO ALLOWED WHERE CORE
    SOLDER USED.WASH HANDS THORO AFTER HANDLING CORE SOLDER,BEFORE (SEE
    SUPP)
Supplemental Safety and Health
SPEC GRAV:DEPENDS ON ALLOY & FLUX.MP:DEPENDS ON ALLOY COMPOSITION.ENTRY
    RTE:INHAL/SKIN/INGEST .HLTH HAZ:KIDNEYS.LEAD OVEREXP UNLIKELY AS
    SIGNIFICANT FUME NOT PRODUCED BELOW 700F,371C,NO SYSTEMIC  EFT
    REPORTED FROM INDUS EXPO.HYGIENE
    PRAC:EATING,DRINKING,SMOKING,APPLYING COSMETICS.

==================  Physical/Chemical Properties  ==================

Melt/Freeze Pt:M.P/F.P Text:SEE SUPP
Decomp Temp:Decomp Text:N/K 
Spec Gravity:SEE SUPP DATA
Solubility in Water:FLUX IS SOLUBLE
Appearance and Odor:SILVER-GRAY WIRE.ODOR IS NIL.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
OXIDIZERS,STRONG ACIDS.
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:FUMES EMITTED IN A SOLDERING OPERATION
    MAY CONTAIN ZINC CHLORIDE.WHEN HEATED TO HIGH TEMP,LEAD EMITS TOXIC
    FUMES.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH
    FEDERAL,STATE AND LOCAL REGULATIONS .RETURN FOR REPROCESSING OF
    METAL.PRODUCT CONTAINS CHEMICAL SUBJECT TO SARA TITLE III SECTION
    313.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.